Konica Copier Setup Instructions

A print driver for the Konica Photocopier needs to be installed to your computer before you can print directly to the copier.

Macintosh Instructions:

Install the Konica Print Driver:

Determine the Konica copier model you want to print to. (See TTSD Konica Copier List)
Download the print driver for your Mac OS. You will need to know the Copier model (see step 1) and the Mac OS version (Apple >> About This Mac).
The installation file will down-load to your Desktop or your Downloads folder as a zip file .
Double click to open. It will expand into another folder which contains the print driver installer.
Double click on the installer for your OS to install
Follow all prompts to complete the install. You won’t see anything after the installation is complete.

Setup the Konica Printer on your Mac (after installing the driver, above):

Open a Word Document and choose File and then Print.
On the Print window click the Printer drop-down menu.
Select the Add Printer... near the bottom of the list.
Click on IP icon at the top of the Add Printer window.
Fill in the window with the following options:
1. * Protocol: Line Printer Daemon - LPD
2. * Address: See IP Addresses for your building
3. * Queue: Print
4. * Name: Konica B/W
5. * Location: Where Copier is Located (Workroom)
6. * Use:
  1. Choose "Select Software..."
  2. Search for "Konica"
  3. Select your copier version
Click the Add button.
The Installable Options window will open; select the following options:
Click the Continue button; this will you to the Print window.
1. * Paper Source Unit: None
2. * Finisher: (FS-526 for Bizhub 552)
3. * Punch Unit: (ZU-606 2/3 Hole for Bizhub 552)
4. * Hard Disk: Checked
5. * Secure Print Only: Unchecked
From Print window, select Konica B/W from the Printer drop-down menu.
Click Copies and Pages
Choose Output Method
Check the Account Track checkbox:
1. * Department Name: LEAVE THIS BLANK
2. * Password: enter your 4-digit department code
3. * Save Settings: Checked
4. * Do not show this window when setting: Unchecked
Click OK
In the Presets down-down menu at the top of the window and select Save Current Settings As Preset...
Preset Name: Konica
Preset Available For: Only this printer
Click OK
On the Print window, click the Print button to test your printer.
When using any other application (Chrome, Firefox, etc), you'll have to select the Copier from the Printer list, and select the Konica Preset. (otherwise you'll need to select the output method from the "Layout" drop down menu.

Window User Setup

* Add the new printer:
1. * For Windows XP machines (rectangular start button), go to the start menu and select “run”. In the run “open:” dialogue that pops up type: \\hood and hit enter.
2. * For Windows 7 machines (round start button) in the “Search programs and files” area right above the start button type:\\hood and hit enter.
3. * Browse all the hood shares until you find the printer called “bizhub751”. Double click on this printer.
* Add your account code to the new printer’s settings:
1. * From the open printer window that comes up after the drivers are installed, go to “printer” dropdown.
2. * Select “printing preferences”.
3. * Under the “basic” tab, locate the button for “Authentication/Account Track” and select it.
4. * Leave the “Department Name” blank, and type your four (4) digit copy code into the field called “Password”.
5. * Click “ok”, and then “ok” on the preferences screen.

You now should be able to select the bizhub 751 printer and print successfully to it!

If you are an Infinite Visions User an additional step needs to be taken!
* Infinite Visions will require an additional step
* From Visions go to file, print setup.
* Select the Konica Minolta 751.
* Click on Properties
* Under the "Basic" tab, locate and press "Authentication/Account Track".
* Enter your 4 digit copy code into the "Password" field.
* Press "ok" three times.
* You now should be set to print from Visions as well!

List of Konica Copiers (you'll need to know your copier code)

Konica Drivers:

* Konica Website for Downloading Drivers

If you have trouble with this process please put in a tech request.